The structure of pressure injection mould:
  1.feeding device consists of a feeding chamber and a pressure rod, movable feeding chamber pressure injection mould and die are separable, fixed feeding chamber pressure injection mould and die together.
  2.The part is the forming parts of the direct contact with the plastic parts, such as die, punch, core etc..
  3.The runner system of injection mold and similar, mainly by the sprue, runner, gate.
  4.guide mechanism comprises a guide post, a guide sleeve, the lower mold, positioning, guiding role.
  5.The push rod,introduced the injection mold mechanism adopts push pipe, pushing plate and pushing mechanism, can also be used in injection mold.
  6.The heating element injection pressure of heating system is the main electric rods and electric heating coil, charging chamber, the upper die, lower die need heating. Movable injection mold by press, bench heating plate is heated.
  7.side parting and core pulling mechanism if the plastic parts with concave side shape, must use the side parting and core pulling mechanism, similar structure and specific methods of injection mold design.